Whether in the chemical, metal, or automotive industries, ship building, supplies, or disposal: The Dräger X-plore® 5500 full face mask is the right solution for environments where not only increased respiratory protection is required, but also a clear vision is mandatory.

​Designed with simplicity in mind, the Dräger PARAT® 1200 is an extra small mouthpiece / nose clip filtering escape device equipped with a multi-gas ABEK filter that offers you 10 minutes of protection against a variety of toxic industrial gases and vapours. This compact lifesaver is approved to the only recognized standard for filtering industrial escape devices (DIN 58647-7).

​A perfect combination: modern design and light weight offer you extra protection and comfort. Choose from the low-maintenance, cost-effective Dräger X-plore® 3300 half mask or Dräger X-plore® 3500 version for long lasting protection under tough conditions.

The Dräger X-plore® 1300 combines proven and reliable respiratory protection with intelligent new ideas ensuring a high level of comfort and ease of use.

Breathe cool, stay safe: Dräger X-plore® 1700 makes breathing easy and comfortable. The CoolSAFE filter material ideally combines low breathing resistance and high filter performance in one mask. And the CoolMAX valve efficiently releases humid and warm exhaled air to the outside. This makes breathing particularly easy and keeps you cool under the mask.

​Dräger X-plore® 1900 is a high-performance, single-use dust mask for protection against fine dust and particles. The premium particle filtering mask is available in two sizes, combining ease of use, exceptional comfort and optimal fit. For the highest degree of safety – even for people wearing spectacles.

For the safe emergency evacuation of bed-ridden patients.

Our Safety Sheet Evacuation Sheet fixes semi permanently to the bottom of a flexible foam mattress by means of strong elastics. It has safety belts to hold the patient on the mattress and pulling straps at each end. The combination of the slippery sheet and mattress which will pass through narrow doorways and down stairs.

For smoothly evacuating mobility impaired patients over a variety of surfaces.

The wall mounted Safety Mat Evacuation Sled from allows the smooth transfer of disable patients over any surface even concrete or stairs. The sled can be stored in the wall mounted bag provided and easily deployed when needed in an emergency. Supplied complete with wall mounted rapid deployment pouch.

A light, portable, strong, high quality stairway carry chair.

The Safety Chair EV-2000 evacuation chair provides a quick and easy emergency evacuation with a 159kg (350lbs) weight capacity and folds away neatly for compact storage.

Powered assistance for both upward and downward evacuation.

The EV-8000 powered evacuation chair offers easy evacuation. Our powered solution uses Power-Climb technology to make negotiating stairwells that bit more less stressful. Capable of both one and two person operation.

Higher weight capacity of 250kg (550lbs) for bariatric passengers.

The Safety Chair EV-7000 assists with downward evacuation for bariatric payloads in an emergency evacuation. This evacuation chair can also be used for upward and downward evacuation for non-bariatric payloads.

Robust, versatile with quick deployment.

The EV-5000 evacuation chair is capable of various forms of evacuation. Suitable for 1 or 2 person operation, our Safety-Trac belts give the user ultimate control for both ascending and descending evacuation.

The standard model evacuation chair.

The EV-4000 evacuation chair provides a quick, easy and safe emergency evacuation with a 200kg (440lbs) weight capacity and allows for single person operation.

Safety Chair provides high quality evacuation chairs which are designed and manufactured with the highest medical standards in mind. As a Class 1 medical device PUWER regulations require your evacuation chair is ready to use and remains in the very best condition. 

Evacuation chair servicing is of the utmost importance and should be completed annually. At Safety Chair we offer a fixed cost service programme which guarantees that your evacuation chair is always in good working order.

It is vital for individuals and organisations to have robust evacuation procedures to conform to legislations such as Regulatory Reform (Fire Safety) Order 2005 and the Health & Safety at Work Act.

Assisting the mobility impaired should be supported by dedicated training. We offer both operator training and train the trainer courses for all chairs to ensure you have the required skill set when needed if an emergency evacuation is triggered.

Protect your Evac+Chair or other building assets using our anti-theft device, which is fitted with a key-controlled alarm.

The alarm is self contained in red polycarbonate housing with a compact design. It can easily be installed in minutes with corresponding symbols that can be used globally. It has both a visual and an audible alarm when activated which is powered by a 9v battery.

The purpose of the transfer board is to bridge the gap between two seats, for example, a wheel chair to evacuation chair and vice-versa. A transfer can then be carried out whilst negating the need to lift the passenger.

The Evac+Chair Comfy Seat will provide patients with an equal level of comfort comparative to a wheel chair seating arrangement. It is ergonomically designed and manufactured from memory foam which aids in a horizontal transfer. It can easily fit onto the frames of the 300H, 500, 600H & 110 Evac+Chairs.

The Sprinter 85 powered stair climber provides a convenient, robust, cost efficient solution to high volume logistics delivery. The lightweight design, simple push-button control, easy stowage and removable fast-charging battery make the Sprinter 85 a market-leading powered stair climber. 

Stanley’s Sprinter Lifter is an automatic hand stacker that enables the safe, quick, and efficient loading and unloading of materials. A cost-effective alternative solution to a permanent vehicle tailgate, the electric hand stacker has a 170kg lifting capacity with a lift height of up to 1.1m.

The Sprinter Pro 425 is the most powerful powered stair climber in the Sprinter range. With a carrying capacity of up to 425kg, the Sprinter Pro 425 stair climber trolley enables weighty and awkward loads to be manoeuvred by a single operator - using a remote control.

Our Guard-Check gives you a quick and easy method to accurately check the guard opening size, based on the distance from the hazard zone for hands as referenced by BS EN ISO 13857.

Our Opto-Check gives you a quick and easy method to accurately check the operation of an opto-electronic sensing device, based on the methods as referenced by BS EN ISO 61496-2 and HSG180. It can be used during the design, installation, and inspection of barrier guards to make sure they operate correctly.

WHAT SPECIFICATIONS OF WORKWEAR ARE REQUIRED FOR WOMEN?

ACT Distribute and Co-Author a wide variety of health and safety related publications including books from iAS, RMS Publishing and individual authors.

iAS Awareness E-Learning is ideal for induction training.

ACT offer a wide range of Construction Industry Training Board courses.

ECITB's CCNSG training scheme is widely recongised throughout the UK construction sector.

A brand new course focusing on holistic risk management for professionals of any field. This course has been created by NEBOSh and the IIRSM.

All of our training courses are available as in-house training courses delivered at your location.

A one day health and safety training course suitable for director and executive level.

IOSH Working Safely is an 8 hour e-learning course suitable for any staff to improve their understanding of health and safety. 

This Diploma level qualification is ideal for safety professionals looking to develop new skills or show competence in health and safety practice.

An accredited National Vocational Qualification (NVQ) in health and safety. This level 3 course is ideal for professionals looking to develop a career in health and safety while at work.

Level 3 Health and Safety Certificate for construction professionals. Available as a classroom, live virtual course and e-learning.

Ideal for supervisors, managers, and team leaders, IOSH Managing Safely helps those responsible for the health and safety of others to assess and control workplace risks.

The NEBOSH National Certificate in Construction Health & Safety course is designed for managers, supervisors and site workers with health and safety responsibilities, working in the construction industry.

The NEBOSH Fire Safety Certificate is designed for managers and supervisors who are responsible for fire safety legislation and equips candidates with a range of practical fire safety skills. 

The Electricity at Work Regulations 1989 require any electrical equipment with potential to cause injury to be maintained in a safe condition. Which is where Portable Appliance Testing (PAT) comes in (now officially referred to as In-service Inspection and Testing of Electrical Equipment).

Speak to us for all things fire safety, including, Fire Risk Assessments, Fire Extinguisher Servicing, Fire Door Inspections and Fire Alarms & Emergency Lighting.

SK Training are licensed to deliver the UKATA Asbestos Awareness course, which is for those who have no intention of removing asbestos but work on buildings built or refurbished before the year 2000 where asbestos could be present. It aims to make you aware of the dangers of Asbestos but does not train you to work with any Asbestos containing materials.

Any water system, with the right environmental conditions, could be a source for legionella bacteria growth, so it's important to understand the risks in your buildings, including if you are a landlord, with a Legionella Risk Assessment.

If you own or work in premises built before 2000, you must ensure a suitable and sufficient Asbestos Management Survey has been carried out. 

SK Compliance’s assessors will sample suspected materials, providing you with analysis results and a full report detailing the type, location and risk level, and highlight any actions required.

SK Compliance can deliver a wide range of services to ensure the safety of all of your electrical equipment. For example, do know how frequently Electrical Inspections are required for your premises? It's usually at five-yearly intervals, at a minimum, but more frequently for landlords and certain other places. Speak to #oneoftheteam who will be able to advise you. 

Training is an essential part of health and safety management, and Manual Handling and Working at Height are some of the most commonly required training courses as they're relevant for so many roles.

A key part of our mental health and wellbeing offering is Mental Health First Aider training. 

This 2-day course qualifies candidates to be their workplace’s Mental Health First Aider. 

SK Training can deliver both Emergency First Aid at Work (1 day) and First Aid at Work (3 day) courses. Post-pandemic, it's important to review your first aider situation to ensure there are enough qualified people on site at any one time.

SK Training is licensed to deliver the IOSH Managing Safely course, which is designed for any individual that has responsibility for managing the health and safety risks, resources and workplace practices for their organisation.